|
Have your devices with serial interface under control through ethernet with AK-Nord interfacesSerial to LAN or WLAN interfaces, known also as device servers are widely spread and favourite because of their ability to easily implement a device with serial port into a LAN or WLAN. New LAN and WLAN industrial DIN rail device servers AK-DinRail-XXL and AKDinRail-XXR provide this functions for devices with RS232 or RS485 interface and support all modern communication protocols and security functions.
To have a device available in LAN brings many advantages, as we described it
in an article about
XT-Pico-USB
interface. Any device with RS232 or RS485 is usable, e.g. industrial measuring
devices, laboratory instrumentation, flow volume and pressure sensors, modems,
various devices with microcontrollers and many other.
- AK-DinRail-XXL
enables to connect 2 devices with serial RS232/ RS485 interface to LAN.
Supports 10/100Mbit Full/Half duplex RJ45 Ethernet and all latest protocols
including Ipv6 and TCPv6. Thanks to possibility to use SD card, it allows
saving one´s own homepage or JAVA – Applets. AK-DinRail-XXL features many
functions like: Modem Emulation, Connect-On-Data, Auto-Connect,
Tunnel-Mode,DYNDNS-Client, FTP-Server, LPR-Server, 20KB Flash drive ,
Flash-File-System, SD- and DF-CARD, E-Mail – Client, TCP/UDP –Client,
TCP/UDP –Server, SYSLOG-Client. AK-DinRail-XXL is able to work at
temperatures from -40 to +70°C, consumes less than 1 watt and is enclosed in
only 22,5mm thick housing.
-
AK-DinRail-XXR enables to connect 2 devices with serial RS232/RS485
interface to Wireless LAN – WLAN or 10/100Mbit Ethernet. Wireless LAN
includes all necessary protocols such as IEEE802.11b,g as well as
IEEE802.11n (Draft 3.0) allowing simple and easy integration. All required
and modern safety functions such as WEP 64/128 Bit, WPA1 and WPA2-Personal
are integrated and thus offering the highest safety standard. Furthermore,
it features many useful functions like ADHOC / INFRA – Modus, Fast-Roaming,
AutoConnect with Wi-Fi Protected Setup (WPS-PBC), Hardware WEP, TKIP, AES
Engine, WEP 64Bit and 128Bit up to 4 Keys, WPA1 a WPA2. Power consumption is
2.2W and specified temperature range is -10 to +65°C.
Advantages / Features:
- RS232/485 to LAN and WLAN device servers
- DIN rail mounting
- 10/100 Mbit ethernet
- supports IEEE802.11b,g,n WLAN protocols
- supports all latest LAN protocols including IPv6 and TCPv6
- for 2 devices with serial interface RS232 or RS485
- highest safety standard
- SD card slot
- single supply 7-32V
Further infromations you can find also in the
AK-nord manual.
201108210315.9.2011TelecommunicationSOS electronic s.r.o.
|
SENSOR+TEST 2012 ... 22.-24.5.2012 - Nuremberg, DEAUTOMATICA 2012 ... 22.-25.5.2012 - Munich, DE"ECOLOGY IN ELECTRONICS", WARSAW 2012 ... 28-29.05.2012 - Warszawa, PLPRAGOALARM / PRAGOSEC 2012 ... 5.-7.6.2012 - Praha, CZIntersolar Europe 2012 ... 13.-15.6.2012 - Munich, DEELEKTRO 2012 - Moscow ... 13-16 June 2012 - Moscow, RUIFA 2012 ... 31.8.-5.9.2012 - Berlin, DE International Engineering Fair (MSV) ... 10.-14.9.2012 - Brno, CZFOR ELEKTRO 2012 ... 18.-22.9.2012 - Praha, CZELO SYS 2012 ... 9.10. - 12.10.2012 - Trenčín, SK
|