Reliable and aesthetic cooling for high power LEDs and LED strips
LEDs are becoming very popular, with many possibilities of utilisation. For their real usage in praxis, we need a suitable heatsink, which has a cooling, safety and aesthetic function.
For this purpose are very suitable two new aluminium profiles in our offer.
They are suitable for most of power LEDs, as well as LED strips.
* heatsink
ZH9044 is suitable for direct mounting on flat surfaces or also as
immersed into notches in various materials. With its 22mm inner width, it is
suitable for many power LEDs. Strips with up to 11mm width can be embedded in
two rows in parallel.
* heatsink
ZH7788 is ideal for mounting into corners, or also on flat
surfaces, if there is a desired 30° angle, which is betwwen a LED base and the
rear side of the heatsink. This massive type is suitable even for a higher
power. Even very high power LED arrays can be used, or it is possible to embed
up to three LED strips, if their overall width is within 31 mm.
Both types also contain slots for PCB, as well as slots for possible covering
by a translucent cover. Except usage for LED lighting, the heasinks are also
suitable for various other applications, where they are able to serve as a
heatsink and as an enclosure at the same time.
Usable power load is necessary to try for a given application, a real thermal
resistance of both heatsinks strongly depends on the way of installation.
Naturally, resultant thermal resistance -Rth is influenced mainly by a
possibility of air convection and a thermal shielding of surrounding elements.
Advantages / Features:
- ideally suitable for power LEDs and LED strips
- simple installation of LED strip by sticking down
- usage for flat surfaces, as well as into corners
- aesthetic and safe solution
201110090212.10.2011ComponentsSOS electronic s.r.o.