Go to HomePage ELECTRONIC-INFO.EU
QRcode

Precise and price-convenient measuring of AC current

Precise

With current transformers, you can measure AC current simply and with a sufficient accuracy, moreover with maintaining of a high safety level thanks to a galvanic isolation.

General purpose AC current measurment, overload and shortcut protection, load drop or shutdown detection and similar application require simple and reliable solution. Current transformers meet all these requirements and they add further bonuses like galvanic isolation, no intervention to a measured circuit and a convenient price.

Advantages / Features:

  1. simple measuring with a galvanic isolation
  2. high sensitivity
  3. no influence to a measured circuit
  4. long lifetime
  5. severe condition resistant
  6. price-convenient solution

As we know, one of AC current measurement methods is based on the usage of a current transformer. Alternating magnetic field around a wire lead, which in a continual proportion to a current flowing through a wire, will induce an AC voltage in a measurement transformer. At a suitable construction and a right transformer loading, is the output voltage in a continual proportion to a current in a measured lead. Perhaps the biggest advantage of this method is the fact, that a measuring circuit is galvanically isolated from a measured lead and at the same time, the transformer doesn´t indtroduce any added load neither any influence. If we´d like to go to a detail, the transformer consumes a negligible amount of energy of few tens of mW/10A from a measured lead, which is being lost in the winding and a load of the transformer.

Every current transformer is designed for a certain load, i.e. at a certain load it provides most accurate results. For example for the type AC-1050 it is 100 Ohms. In such a case is valid a transfer ration 1000:1, i.e. to the load flows a 10 mA current at a 10A current in a measured lead. It means, that on a 100 Ohm we will measure a voltage with a value of 1V. Output of a current transformer can be connected to a panel meter, digital voltmeter, oscilloscope or an AD converter input. By using an AD converter, it is also possible to monitor a course of a current and to discover various nonlinearities in a power consumption. 

Talema current transformers are top quality components with an outstanding quality / price ratio. Transformers are designed for soldering into a PCB. In our offer you can find more types, up to 100A maximum current. Currently we can offer you type AC 1050 also from the producer´s stock (ca. 8000 pcs) with 1-2 weeks delivery time (standard delivery time uses to be 20 weeks). Detailed information will provide you datasheets at given types.


SOS electronic s.r.o. Source: http://www.soselectronic.com/?str=1069

© SOS electronic s.r.o.

SOS electronic s.r.o.

2012042069 / 30.4.2012 / Test & measurement / SOS electronic s.r.o.


Traco TBL power supplies fit into every distribution box
Traco TBL power supplies fit into every distribution box
Low profile, higher safety and a wide spectrum of power ranges ensures, that in the TBL series you´ll find the right type for your demands.
..more
They act only ones - right then, when it´s really necessary... 
They act only ones - right then, when it´s really necessary...
With thermal fuses you´ll make a big step towards a higher safety of your device.
..more
And where´s the oxygen?
And where´s the oxygen?
With the Figaro sensors, it´s possible to determine an oxygen concentration accurately and reliably.
..more
MEC push-buttons can be found even in the dark 
MEC push-buttons can be found even in the dark
Illuminated push-buttons represent a universal solution into every environment.
..more
Plus 50% of power for a scant one Euro?
Plus 50% of power for a scant one Euro?
High efficiency, low standby power consumption and a power reserve, all this can be gained with a new adapter from our portfolio.
..more
Displays for those, who want to have everything under control 
Displays for those, who want to have everything under control
If you want to go to the heart of a thing, then LCD TFT displays Winstar are right for you.
..more
Say stop to unwanted „visitors“
Say stop to unwanted „visitors“
EMI mains filters Schurter combined with an input AC connector will stop interference there, where it´s the most efficient - at the input.
..more
4D Systems displays will give a cape to your BeagleBone 
4D Systems displays will give a cape to your BeagleBone
4,3“ and 7,0“ LCD „Cape“ connected to a BeagleBone module can transform this microcomputer to a standalone module with a graphic output.
..more
M531 - Arbitrary Waveform Generator 
M531 - Arbitrary Waveform Generator
The M531 is a single channel USB arbitrary waveform generator compatible with USB 2.0 and USB 1.1 interface. The generator has two outputs: both generate same waveform, but with different peak-peak voltage. The low level output has 50ohm output impedance and maximal peak-peak voltage of 9V. There is no external power supply required to enable low level output (it is powered from USB bus).
..more
EA500-0 Control panel for USB oscilloscopes
EA500-0 Control panel for USB oscilloscopes
The compact size and simple data transfer and storage of an USB oscilloscope could be an important advantage when using a computer or notebook as the basic tool. Especially if you work outside the laboratory, you may not have enough space for notebook and for comfortable mouse manipulation.
..more
K520 series kits (K521-K526)
K520 series kits (K521-K526)
The M520 family offers six reliable devices usable for the common measurements. These devices are optimized for great price/performance ratio. The devices use metal casing, which withstand rough manipulation and is fully recyclable. The M520 series offers precise electronic engineering (as is usual in all ETC devices) and automated calibration processes during manufacturing. Each kit contains the traceable calibration certificate. Since the M520 series devices use USB 2.0 for communication (with automatic fallback to USB 1.1), the device provides you with high refresh rates comparable to the stand-alone devices.
..more
ETC EA132  Differential Probe
ETC EA132 Differential Probe
The EA132 Differential Probe is an auxiliary device to any oscilloscope. It can be connected to any of the measuring channels and is powered from a standard 9V internal battery or a wall adapter, which is part of the package.
..more
M522 - 60MHz Digital Storage Oscilloscope
M522 - 60MHz Digital Storage Oscilloscope
The M522 is a dual channel USB oscilloscope compatible with USB 2.0 and USB 1.1 interface. The ease of installation and connection to computer makes M522 extremely portable. The device is connected to computer using standard USB 2.0 cable and is powered directly from computer. The maximum power consumption of 2.25W makes this instrument highly usable with battery-powered notebooks.
..more
K531 - Arbitrary waveform generator kit
K531 - Arbitrary waveform generator kit
The kit contains the M531 AWG (Arbitrary waveform generator), which can be (together with included accessories) used in wide range of applications. Device uses metal casing, which withstand rough manipulation and is fully recyclable
..more
M521 - 60MHz Digital Storage Oscilloscope
M521 - 60MHz Digital Storage Oscilloscope
The M521 is a dual channel USB oscilloscope compatible with USB 2.0 and USB 1.1 interface. The ease of installation and connection to computer makes M521 extremely portable. The device is connected to computer using standard USB 2.0 cable and is powered directly from computer. The maximum power consumption of 2.25W makes this instrument highly usable with battery-powered notebooks.
..more
M526 - 150MHz Digital Storage Oscilloscope
M526 - 150MHz Digital Storage Oscilloscope
The M526 is a dual channel USB oscilloscope compatible with USB 2.0 and USB 1.1 interface. The ease of installation and connection to computer makes M526 extremely portable. The device is connected to computer using standard USB 2.0 cable and is powered directly from computer. The maximum power consumption of 2.25W makes this instrument highly usable with battery-powered notebooks.
..more

All trademarks are the property of their respective owners. ISSN 1801-3813 , Kontakt: FANDA elektronik s.r.o, Těrlická 475/22, 735 35 Horní Suchá, tel. 00420-603531605, info@elektronika.cz